BrosTrend 5 km Outdoor WiFi Bridge Kit
Model No.: EAP5
Specification Table
| Hardware | |
|---|---|
| Chipset | IC-SF19A2890 |
| Interfaces | DC 12V 1A power inlet 1*10/100/1000Mbps passive PoE/LAN port 1*10/100/1000Mbps 802.3af/at PoE/LAN port |
| Button | 1 * Reset Button |
| LED Indicator | Power, LAN1, LAN2, LED1, LED2, LED3 |
| Antenna | 2 x 12dBi internal dual-polarization high-gain directional antenna |
| Antenna Beam-width | Horizontal: 30° Vertical: 30° |
| Power Consumption | 6.5W |
| Deployment | Pole/wall mount deployment |
| Waterproof Level | IP65 |
| Power Method | 12V 1A Passive PoE 12V 1A DC Standard PoE 802.3af/at |
| Maximum Passive PoE Length | Passive power over Ethernet via PoE/LAN up to 60 meters (196 feet) |
| Maximum Standard PoE Length | Standard power over Ethernet via PoE/LAN up to 100 meters (328 feet) |
| Lightning Protection | 6 KV |
| Wireless | |
|---|---|
| Standards | IEEE 802.11 a/b/g/n/ac |
| Frequency Range | 5GHz |
| Maximum Wireless Rate | 867Mbps |
| Wireless Security | WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK |
| Reception Sensitivity | 11a 6Mbps: -90dBm±1.5dBm 11n MCS7: -70dBm±1.5dBm 11ac MCS9: -59dBm±1.5dBm |
| Software | |
|---|---|
| Operating mode | AP Mode Station Mode |
| Default login IP | AP (Transmitter): 192.168.2.1 Station (Receiver): 192.168.2.2 |
| Default Login Username / Password | admin |
| Channel Bandwidth | 20/40/80MHz |
| Supported Functions | Enable/Disable Wireless Radio, SSID Hidden, Wireless Client isolation, Channel Shift, Wireless Access Control, Client Limitation For SSID, WMM Capable, APSD Capable, Transparent Bridge, Schedule Reboot, Page Timeout, Ping Watchdog, Time and Date Setting, Username Management, etc. |
| Scenarios | Support P2P (point-to-point) and P2MP (point-to-multi-point) scenarios |
| Other | |
|---|---|
| Package Contents | 1 x Outdoor AP (Transmitter) 1 x Outdoor Station (Receiver) 2 x DC Power Adapter 2 x Passive PoE Injector 2 x Ethernet Cable 4 x Screw 4 x Expansion Bolt 2 x Plastic Strap 1 x Quick Installation Guide |
| Environment Requirement | Operating temperature: -30°C - 60°C Storage temperature: -30°C - 70°C Operating humidity: (10% - 90%)RH, non-condensing Storage humidity: (10% - 90%)RH, non-condensing |